AXAGON ADSA-ST USB3.0 - 2x SATA 6G CLONE DUAL HDD Dock Station
| interface |
USB 3.0 / USB 2.0 / USB 1.1 |
| rate |
5000 / 480 / 12 Mbit/s (super / high / full speed) |
| connector |
USB 3.0 Type B female (on the docking station) |
| connector |
USB Type A male (on the cable) |
| cable |
70 cm, disconnectable |
| Output |
|
| interface |
Serial ATA 3.1 |
| rate |
6 / 3 / 1.5 Gbit/s (SATA III / SATA II / SATA I) |
| connector |
2x 22-pin SATA data and power female |
| compatibility |
all SATA I / SATA II / SATA III disks |
| total permeability |
5 Gbit/s theoretically (given by USB 3.0 input) |
| Supported device |
|
| 2.5" |
yes (SATA HDD/SSD) |
| 3.5" |
yes (SATA HDD) |
| 5.25" |
no |
| max. disk capacity |
all, without limitations |
| max. height of 2.5" disk |
all, without limitations |
| Supported features |
|
| disk cloning |
yes (without connection to a PC) |
| UASP |
yes |
| TRIM |
no |
| S.M.A.R.T. |
yes |
| boot from connected disk |
yes |
| putting disk to sleep |
yes (HDD Auto Spindown / 10 min) |
| disk turning off |
yes (HDD Turn Off) |
| automatic installation |
yes |
| Plug and Play |
yes |
| Hot Plug |
yes |
| Other features |
|
| design |
aluminum / plastic |
| screwless mounting |
yes |
| indication |
green LED - power supply turned on (permanently on) |
| indication |
2x blue LED - each for one disk, disk connection (permanently on), data transmission (flashes) |
| indication |
4x LED 25%-50%-75%-100% - cloning takes place (flashes), cloning finished (permanently lit) |
| controls |
power switch |
| controls |
CLONE button - triggers disk cloning |
| dimensions |
142 x 102 x 80 mm |
| weight |
330 g (without accessories) |
| Power supply |
|
| on the bus |
no |
| through power adapter |
yes (power adapter included) |
| OS support |
|
| MS Windows |
10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions) |
| MS Windows Server |
2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
| Mac OS |
X 10.x and higher |
| Linux |
kernel 2.6.x and higher |
